Built for motivation, clarity, and all-day reliability
Studios, gym floors, and locker rooms each need a different kind of sound - energy where it counts, clarity where it matters.
Electro-Voice and Dynacord systems deliver motivating music and clear instruction across the whole facility -
in even the most demanding, reverberant spaces.
Energy where you want it, clarity where you need it.
The right system delivers big, motivating music on the floor and clear instruction in every class - with controlled coverage that holds up in tough acoustics.
Find the system that fits your space
Start with a system sized for spaces like yours — then adapt it with your integrator.
Studios & training rooms
Lapso Studios — a high-end fitness brand in Barcelona built around cycling, functional fitness, and barre — rides every class on its audio: EVC loudspeakers with a Dynacord MXE5 matrix carrying the instructor's cues over the music, tuned in SONICUE.
Typical needs
- Voice-over-music clarity
- Energy at class level
- Per-studio zones
- Instructor mic ready
An ultracompact two-way install speaker with dual 6.5-inch woofers and a rotatable 90° x 50° horn.
An ultracompact two-way install speaker with a single 8-inch woofer and rotatable 90° x 50° horn.
An IP65 5.25-inch surface speaker with a marine-grade grille for the harshest outdoor sites.
A weatherized 8-inch two-way install loudspeaker with 100° x 100° coverage, in white.
A 2-channel install DSP power amplifier rated 2 x 650 W, with integrated FIR Drive speaker processing, controlled in SONICUE, Euroblock connections.
A 4-channel networked DSP install amplifier delivering 1,500 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
A 4-channel networked DSP install amplifier delivering 3,000 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
A 4-channel networked DSP install amplifier delivering 6,000 W total, with powerTANK power sharing, 4 mic/line inputs, 12x12 matrix mixer and FIR-Drive processing in a single rack unit.
An open-architecture DSP matrix mix engine with 12 analog in / 8 analog out, 64x64 Dante, dual-SHARC processing, fully suppoerted in SONICUE.
A wall-mounted controller for the VZX-8 with a 1.77-inch color display and rotary encoder for zone, source, level, media playback, and programmable system control.
A 5.7-inch Full HD touch panel controller for SONICUE systems, powered over Ethernet and flush-mounted in a single-gang box.
Lapso Electro-Voice and Dynacord get Lapso Studios in a spin
Gym floors & clubs
EVID ceiling and surface families cover the floor evenly, subwoofers where the energy needs weight, zones so the front desk stays conversational.
Typical needs
- Even floor coverage
- Front-desk paging
- Multi-zoning
- Subwoofer options
An ultracompact two-way install speaker with dual 8-inch woofers and a rotatable 90° x 50° horn.
A weatherized 8-inch two-way install loudspeaker with 100° x 100° coverage, in white.
A weatherized 15-inch two-way install loudspeaker in white with wide 90-by-55 coverage.
A compact dual-10-inch surface-mount subwoofer that anchors indoor and outdoor music systems.
A weatherized 18-inch install subwoofer that anchors the EVC system outdoors and in.
A dual 15-inch EVF G2 subwoofer reaching down to 32 Hz.
A 4-channel networked DSP install amplifier delivering 1,500 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
A 4-channel networked DSP install amplifier delivering 3,000 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
An 8-channel networked DSP install amplifier delivering 6,000 W total, with powerTANK power sharing , 8 mic/line inputs, a 16x16 matrix and FIR-Drive procesing in a single rack unit.
A 8-channel install DSP power amplifier rated 8 x 1250 W, with 96 kHz FIR Drive processing and OCA/Dante networking.
An open-architecture DSP matrix mix engine with 12 analog in / 8 analog out, 64x64 Dante, dual-SHARC processing, fully suppoerted in SONICUE.
A networked wall controller with a 1.77-inch color display and encoder, powered over Ethernet, for SONICUE zone and source control.
A 5.7-inch Full HD touch panel controller for SONICUE systems, powered over Ethernet and flush-mounted in a single-gang box.
Large & multi-room facilities
Multi-zone Dynacord matrix control runs studios, pool areas (IP65-rated cabinets), courts, and common areas from one rack — each room at its own level, all managed together.
Typical needs
- Multi-room matrix
- Wet-area rated (IP65)
- Court and hall coverage
- Central management
An ultracompact two-way install speaker with dual 8-inch woofers and a rotatable 90° x 50° horn.
A weatherized 8-inch two-way install loudspeaker with 100° x 100° coverage, in white.
A weatherized 15-inch two-way install loudspeaker in white with wide 90-by-55 coverage.
The 15-inch EVF G2 in a contained 60° by 60° square pattern.
A weatherized 18-inch install subwoofer that anchors the EVC system outdoors and in.
A dual 15-inch EVF G2 subwoofer reaching down to 32 Hz.
A 4-channel networked DSP install amplifier delivering 1,500 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
A 4-channel networked DSP install amplifier delivering 3,000 W total, with powerTANK power sharing, mic/line inputs, matrix mixer and FIR-Drive processing in a single rack unit.
An 8-channel networked DSP install amplifier delivering 6,000 W total, with powerTANK power sharing , 8 mic/line inputs, a 16x16 matrix and FIR-Drive procesing in a single rack unit.
A 8-channel install DSP power amplifier rated 8 x 1250 W, with 96 kHz FIR Drive processing and OCA/Dante networking.
An open-architecture DSP matrix mix engine with 12 analog in / 8 analog out, 64x64 Dante, dual-SHARC processing, fully suppoerted in SONICUE.
A networked wall controller with a 1.77-inch color display and encoder, powered over Ethernet, for SONICUE zone and source control.
A 5.7-inch Full HD touch panel controller for SONICUE systems, powered over Ethernet and flush-mounted in a single-gang box.
Every space is different — these recipes are starting points.
Proven in Barcelona's studios
At Lapso Studios, the energy of each class rides on the audio — the instructor's voice carrying the cues and the music driving the pace. EVC loudspeakers and a Dynacord MXE5 matrix, tuned in SONICUE, keep both exactly where they belong.
EVC models sized per studio, with 18-inch subwoofers underneath
MXE5 Matrix Mix Engine controlling all the rooms together
Practical design for high-activity spaces
Every facility is different, but the goal is the same: energy and clarity that work together, all day.
Everything works together
Electro-Voice loudspeakers and Dynacord amplification and DSP
are designed as one system — making it easier to design, install, and operate.
Engineered together from the start.
Shared tools make systems easy to run and maintain.
Cleaner setup with fewer
compatibility issues.
Fewer unknowns. More
consistent results.
For integrators and consultants, this reduces risk and speeds up deployment. For venue teams, it means a system that’s easier to operate and support.
Ready to move forward?
For integrators & consultants
Start in the studio
Voice-over-music systems with per-room zones.
For venue operators
Take it outside
Battery-powered EVERSE for classes anywhere.
Talk to a specialist
Consultants who design fitness audio every day.